The following table lists parameter items.
Item
Assignment Method
Dev. Name
Points
58
Downloaded from
ManualsNet.com
Project window
[Parameter]
Select a link device assignment method.
• Points/Start: Enter the points and start numbers of link devices.
• Start/End: Enter the start and end numbers of link devices.
Set a transfer source device and transfer target device.
Set "W" for either of the devices.
Enter the number of points of the device to be transferred.
search engine
[PLC Parameter]
"Operation Setting"
Description
Setting range
• Points/Start
• Start/End
(Default: Start/End)
• W
• SB
• SW
• SM
• SD
(Default: Blank)
• W: 1 to 4096
• SB: 16 to 8192
• SW: 1 to 8192
• SM: 16 to 2048
• SD: 1 to 2048
(Default: Blank)