Remote Password - Mitsubishi Electric MELSEC L Series User Manual

7.3
Set a remote password to a serial communication module.
The following table lists parameter items.
Item
Password Setting
Password Active
Module Setting
For details on a remote password, refer to the following.
Downloaded from ManualsNet.com

Remote Password

Project window [Parameter]
Enter a remote password.
Model Name Select the model name of the target serial communication module.
Start XY Enter the start I/O number of the target serial communication module.
User's manual for the serial communication module used
search engine
[Remote Password]
Description
CHAPTER 7 PARAMETER SETTINGS
Setting range
Up to four one-byte characters
(alphanumeric characters, special
symbols)
(Default: Blank)
LJ71C24
(Default: Blank)
0000H to 0FE0H
7
63