6.2
This section describes how to interconnect modules and how to mount them on a DIN rail.
● Modules must be mounted on a DIN rail.
● Connect an END cover on the right of the terminal module.
(1) Precautions for connecting and mounting modules
• Do not directly touch any conductive parts and electronic components of the module. Doing so can cause
• After the first use of the module, the number of connections/disconnections is limited to 50 times (in
• Do not drop or apply strong shock to the module.
• Do not remove the printed-circuit board of the module from the module case. Doing so may cause failure of
Downloaded from
ManualsNet.com
Installation
malfunction or failure of the module.
accordance with IEC 61131-2). Exceeding the limit may cause malfunction.
the module and/or printed-circuit board.
search engine
CHAPTER 6 INSTALLATION AND WIRING
6
37