Do not slide modules from the edge of the DIN rail when mounting them. Doing so may damage the metal part located on the
back of the module.
(2) Removal procedure
Reverse the mounting procedure to remove the modules from the DIN rail.
(3) Applicable DIN rail models (IEC 60715)
• TH35-7.5Fe
• TH35-7.5Al
• TH35-15Fe
(4) DIN rail stopper
Use a stopper that is attachable to the DIN rail.
(5) Interval between DIN rail mounting screws
To ensure the strength of a DIN rail, tighten DIN rail mounting screws (obtained by user) within 30mm away from
the both edges of the DIN rail and at 200mm-interval between the screws.
42
Downloaded from
ManualsNet.com
DIN rail
35mm
30mm
or less
search engine
P
P
DIN rail mounting screw
(obtained by user)
30mm
P
or less
P=200mm or less