Mitsubishi Electric MELSEC L Series User Manual page 81

Selected Station Communication Status
Monitor
Operation
Test
button
Selected
button
Station
Operation
button
Downloaded from ManualsNet.com
Item
Displays the head module status.
1)
2)
3)
4)
5)
6)
button Performs a communication test. (
Performs a cable test. (
Opens the System Monitor window. (
Performs remote operations (such as remote RUN, STOP, and RESET) to the head module.
(
search engine
CHAPTER 9 CC-LINK IE FIELD NETWORK DIAGNOSTICS
1)
3)
4)
5)
6)
Displays the operating status.
: Operating normally
: Error (Data link continued) (yellow)
: Error (Data link stopped) (red)
Displays the mode.
Displays the MAC address.
Click this button to check error details. Take actions following the description displayed
in "Error Factor" and "Troubleshooting".
Displays the LED status of the head module and the communication status of PORT1
and PORT2. ( Page 20, CHAPTER 2)
Displays the status of the cables connected to PORT1 and PORT2.
: Properly connected
: Error (cable disconnection)
: Error (other than cable disconnection)
User's manual for the master/local module used)
Page 81, Section 9.7)
Description
2)
User's manual for the master/local module used)
Page 89, Section 11.3)
9
79