Chapter 9 Cc-Link Ie Field Network Diagnostics; Diagnostic Items - Mitsubishi Electric MELSEC L Series User Manual

CHAPTER 9
This chapter describes how to check error locations and causes by executing the CC-Link IE Field Network
diagnostics using GX Works2.
When GX Works2 is connected to the master station, the entire network status can be monitored. If the intelligent
device station status cannot be monitored due to cable disconnection or any other error, directly connect GX Works2 to
the head module.
This chapter describes a method for diagnosing the system by directly connecting GX Works2 to the head module. For
the method connecting GX Works2 to the master station, refer to the following.
User's manual for the master/local module used
9.1
The following window shows items that can be diagnosed by CC-Link IE Field Network diagnostics (when GX Works2
is connected to the head module).
1
2
3
Downloaded from ManualsNet.com
CC-LINK IE FIELD NETWORK
DIAGNOSTICS

Diagnostic Items

2
3
Display of the head module status and error details
Communication test
Cable test
System monitor
Remote operation
search engine

CHAPTER 9 CC-LINK IE FIELD NETWORK DIAGNOSTICS

Item
1
Reference
Page 78, Section 9.3
Page 80, Section 9.4
Page 80, Section 9.5
Page 81, Section 9.6
Page 81, Section 9.7
75
9