Mitsubishi Electric MELSEC L Series User Manual page 29

Head module part
*1
Downloaded from ManualsNet.com
Item
Number of I/O points
Number of device points
Number of writes to the parameter memory
Maximum number of
intelligent function
module parameters
Allowable momentary power failure time
Internal current consumption (5VDC)
External dimensions
Weight
This is the maximum number of points that can be assigned to the actual module in the "I/O Assignment" setting of PLC
parameter using GX Works2.
search engine
4096 points, 512 bytes (Number of points accessible to the actual
X
*1
module)
4096 points, 512 bytes (Number of points accessible to the actual
Y
*1
module)
8192 points, 1K bytes (Number of points can be used in the
X program)
(Assign RX0 from X0.)
8192 points, 1K bytes (Number of points can be used in the
Y program)
(Assign RY0 from Y0.)
8192 points, 16K bytes
W (Assign 1024 points (W0 to W3FF) from RWw0.
Assign 1024 points (W1000 to W13FF) from RWr0.)
8192 points, 1K bytes
SB (SB0000 to SB0FFF are used by the system.
SB1000 to SB1FFF can be modified by the user.)
8192 points, 16K bytes
SW (SW0000 to SW0FFF are used by the system.
SW1000 to SW1FFF can be modified by the user.)
SM 2048 points, 256 bytes
SD 2048 points, 4K bytes
Device that directly accesses the buffer memory of the intelligent
U\G
function module (
module used)
100000 times maximum
Initial setting 4096
Auto refresh 2048
Depends on the power supply module used.
1.0A
H 90mm
W 50mm
D 95mm
0.23kg
CHAPTER 3 SPECIFICATIONS
Specifications
User's manual for the intelligent function
3
27