12.7.3
Replacing the ultraslim ODD
Upgrade and Repair Unit
(URU)
Tools:
– Phillips PH1 / (+) No. 1 screw driver
– Slotted screw driver (for bending in or out accessible drive
mounting brackets)
Preliminary steps
▶
"Locating the defective server" on page
▶
"Removing backup and optical disk media" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
Removing the front cover is not required in order to replace the
ultraslim ODD in the 3.5-inch HDD extension box.
Removing the defective slimline ODD
▶ Remove the 3.5-inch HDD extension box, see
HDD/SSD extension box" on page
▶ Remove the ultraslim ODD, see
extension box" on page
Installing the new slimline ODD
▶ Install the ultraslim ODD, see
HDD extension box" on page
▶ Install the 3.5-inch HDD extension box, see
extension box" on page
TX1330 M4
47.
247.
"Removing the ultraslim ODD from the
391.
"Installing the ultraslim ODD into the 3.5-inch
386.
256.
Upgrade and Maintenance Manual
Hardware: 10 minutes
45.
102.
48.
50.
"Removing the 8x 2.5-inch
"Installing the 4x 3.5-inch HDD
Accessible drives
393