Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 235

Figure 139: Connecting cables to the backplane (example 8x 2.5-inch HDD/SSD)
▶ Connect the cables to the backplane:
1 SAS cable to backplane connector "X9"
2 If applicable, OOB cable
3 Power cable
4 SAS cable to backplane connector "X10"
For the cable plan, see
Configuration with SAS expander board
▶ For the cabling with a SAS expander board, see
SAS expander board" on page
TX1330 M4
Hard disk drive (HDD) / solid state disk (SSD)
"Appendix B" on page
269.
Upgrade and Maintenance Manual
519.
"Connecting cables to the
235