Removing The Ultraslim Odd - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Accessible drives
12.7.2

Removing the ultraslim ODD

Upgrade and Repair Unit
(URU)
Tools: Phillips PH1 / (+) No. 1 screw driver
Preliminary steps
▶
"Removing backup and optical disk media" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
The front cover only needs to be removed in order to remove
accessible drive dummy covers. If the HDD extension box is already
installed in the server and will be removed in order to install an
ultraslim ODD, skip this step.
Removing the 3.5-inch HDD extension box
▶ Remove the 3.5-inch HDD extension box, see
HDD extension box" on page 260
390
47.
Upgrade and Maintenance Manual
Hardware: 10 minutes
102.
48.
50.
"Removing the 4x 3.5-inch
TX1330 M4