Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 249

Figure 147: Removing the 8x 2.5-inch HDD/SSD extension box
▶ Carefully pull the 8x 2.5-inch HDD/SSD extension box out of its installation
bays.
▶ Close the locking bar, see
page 91.
Installing accessible drive dummy covers
▶ Install accessible drive filler covers into empty drive bays, see
drive filler covers" on page
▶ Install accessible drive covers into the front cover, see
filler covers" on page
TX1330 M4
Hard disk drive (HDD) / solid state disk (SSD)
"Closing the accessible drive locking bar" on
92.
92.
Upgrade and Maintenance Manual
"Accessible
"Accessible drive
249