Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 67

Basic hardware procedures
▶ Fit the rack front cover on the server front.
▶ Ensure that the rack mounting brackets properly engage on both sides of
the chassis as shown in the close-up.
Figure 21: Installing the rack front cover (B)
▶ Fasten the rack front cover to the chassis with two screws on either side.
Figure 22: Installing the ID card
▶ Insert and push the ID card into its slot until it locks in place as shown.
TX1330 M4 Upgrade and Maintenance Manual 67