Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 199

Installing the 3.5-inch HDD bay top cover
Figure 111: Installing the 3.5-inch HDD bay top cover (A)
▶ Lower the 3.5-inch HDD bay top cover onto the HDD bays.
▶ Place the 3.5-inch HDD bay top cover on the latches of the 4x 3.5-inch HDD
backplane (see circles).
CAUTION
▶
Ensure that the latches of the 4x 3.5-inch HDD SAS backplane
are properly seated in the openings in the HDD bay top cover.
TX1330 M4
Hard disk drive (HDD) / solid state disk (SSD)
Upgrade and Maintenance Manual 199