Installing The Side Cover - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Basic hardware procedures
4.5.3.4

Installing the side cover

Figure 32: Installing the side cover
▶ Open the locking lever on the side cover.
▶ Fit the side cover on the chassis, recessed by 2 cm.
▶ Close the locking lever on the side cover (1). This will slide the top cover
shut engaging the locking mechanism (2).
▶ Connect all cables except the power cord to the server rear.
TX1330 M4 Upgrade and Maintenance Manual 77