Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 420

System board and components
Concluding steps
▶ If applicable, install the SAS expander board, see
expander board" on page
▶ Install the system fan module, see
page 85.
▶ If applicable, install the expansion cards, see
on page 299.
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶
"Resuming BitLocker functionality" on page
▶ Enable the TPM in the system board BIOS, see
system board BIOS".
Enabling the TPM in the system board BIOS
Proceed as follows:
▶ Switch on or restart your server.
▶ As soon as the startup screen appears, press the [F2] function key to enter
the BIOS setup menu.
▶ Select the Advanced menu.
▶ Select the Trusted Computing submenu.
▶ Set the TPM Support and TPM State settings to Enabled.
▶ Under Pending TPM operation, select the desired TPM operation mode.
▶ Save your changes and exit the BIOS.
For information on how to access the BIOS and modify settings, see the
corresponding BIOS Setup Utility reference manual.
420
268.
"Installing the system fan module" on
66.
79.
81.
Upgrade and Maintenance Manual
"Installing the SAS
"Installing an expansion card"
121.
"Enabling the TPM in the
TX1330 M4