Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 243

Figure 143: Bending in mounting brackets
▶ Using a screw driver, bend the four mounting brackets of the middle
installation bay (bay 2) inwards (see close-up):
▶ Bend in the lower two mounting brackets on each side of the drive cage.
▶ Open the accessible drive locking bar, see
locking bar" on page
TX1330 M4
Hard disk drive (HDD) / solid state disk (SSD)
89.
Upgrade and Maintenance Manual
"Opening the accessible drive
243