Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 423

▶ Select the Advanced menu.
▶ Select the Trusted Computing submenu.
▶ Set the TPM Support and TPM State settings to Disabled.
▶ Save your changes and exit the BIOS.
For information on how to access the BIOS and modify settings, see the
corresponding BIOS Setup Utility reference manual.
Removing the TPM
▶ Remove the system board, see
page 452.
▶ Lay the system board on a soft, antistatic surface with its component side
facing down.
Figure 279: Removing the TPM screw
TX1330 M4
"Removing the defective system board" on
Upgrade and Maintenance Manual
System board and components
423