Chapter 7. Configuring Test Options
EIA Remote Loopback
The EIA RLB (Electronics Industries Association Remote
Loopback) option specifies whether the DSU III AR responds to the
RLB input from the DTE. The factory default setting is D
Figure 7-4 shows the menu path for the EIA RLB options.
1= LOCAL
3=CONFIG
2= REMOTE ENTER ADDRESS
Table 7-4 shows the equivalent AT commands for setting the EIA
RLB options.
7-4
1= NETWORK OPT.
2= DTS OPTIONS
3= TEST OPTIONS
4= DIAL OPTIONS
5= MANUAL
Figure 7-4. EIA Remote Loopback Options
Table 7-4. EIA Remote Loopback AT Commands
Front Panel
AT Command
1=DISABLED _R0
2=ENABLED
_R1
DSU III AR User Manual
ISABLED
1= TEST TIMEOUT
2= RDL/EN /DIS
3= EIA LLB /EN /DIS
4= EIA RLB /EN /DIS
1= DISABLED
2= ENABED
Description
EIA RLB disabled
EIA RLB enabled
61202011L1-1
.