Motorized Movement Has Stopped And Unit Cannot Be Moved - AGFA DX-D 100 User Manual

Motorized movement has stopped and unit cannot be
moved
De- The motorized movement has stopped because the unit is switched
tails off or a problem has occurred. The unit cannot be moved.
Cause The wheels are blocked.
Solu-
To move the unit manually:
tion
1. If the wheels have a hubcap, dismount the hubcap from the
2. Remove the two clutch screws (Allen type) located on each
3. To reassemble the hubcap, place the two spacers in the original
Related Links
Storage of Allen wrench
Storage bin on page 24
wheel rim by removing the two fixing screws. Take care not to
lose these screws and the spacers located behind the hubcap.
1
Hubcap fixing screws
1.
wheel using the Allen wrench provided with the unit.
This will uncouple the wheels from the motors (releasing the
brakes) allowing the free motion of the unit.
1
Clutch screws
1.
position, mount the hubcap and secure it with the two fixing
screws.
on page 33
DX-D 100 | Problem solving | 73
0187K EN 20191024 1609