Table of Contents
Advertisement
78 | DR 10s | Getting started
Stopping the DR Detector
To stop the DR Detector:
1. Turn off the detector.
Press and hold the power button until the orange status indicator starts
flashing (approx. 5 seconds).
During shutdown, the orange status indicator is flashing. After shutdown,
all the status indicator lights are off.
2. Turn the latch counterclockwise (unlock) (1) and lift the battery up (2),
and then remove the battery.
Figure 18: Remove the battery
Related Links
Charging a battery
Storing a battery
Topics:
•
Automatically turning the DR Detector to sleep
•
Automatically turning off DR Detector
0351A EN 20190319 1349 *
2
1
Note: When the detector will not be used for some time, remove
the battery. Otherwise, overdischarge may occur, leading to a
shorter battery life.
Note: When not in use, keep the detector, handle unit with grid
in a designated location or in a location where they are safe
and cannot fall down.
on page 83
on page 88
Advertisement
Table of Contents
