ZyXEL Communications 2864 Series User Manual page 99

Code Bits
&K3
&K4
S28 Bit-mapped register; default: 68:
Code Bits
B0 (7)
B1
&B0 (6)
&B1
&G0 (5,4)
&G1
&G2
&Y0 (3,2)
&Y1
&Y2
*L0 (1)
*L1
&J0 (0)
&J1
S29 Default dial phone number pointer; default: 0:
Use AT&Zn=<number> to store a phone number at address n.
Code
*Dn
Bin. Dec. Description
011 3 V.42 + MNP4.
100 4 V.42 + V.42bis (Compatible with &K2;
default; see also S38b5).
Bin. Dec. Description
0 0 Selects ITU-T V.22 for 1200 bps communi-
cation. (Default)
1 128 Selects Bell 212A for 1200 bps communica-
tion.
0 0 DTE/DCE rate follows link rate. (See also
S18, S44b6)
1 64 DTE/DCE rate is fixed at the DTE setting,
range from 300 to 460.8 Kbps. (Default;
see also S44b6)
00 0 No guard tone. (Default)
01 16 Reserved.
10 32 1800 Hz guard tone.
00 0 Destructive, expedited break.
01 4 Non-destructive, expedited break. (Default)
10 8 Non-destructive, un-expedited break.
0 0 Panel key is normal. (Default)
1 2 Panel key is locked.
0 0 Single line, RJ11 phone jack. (Default)
1 1 Multiple phone/modem line, RJ12/RJ13
phone jack.
Dec. Description
0-49 Sets the default dial phone number pointer at
location n in the phone directory stored in
EEPROM.
8–13