Profiles - ZyXEL Communications 2864 Series User Manual

The 2864 series modems let you save up to 4 sets of configurations which are called
profiles. You can save each entire modem configuration in the non-volatile EEP-
ROM memory for later use as default settings, or you can use it as the power-on de-
fault. Use the SAVE TO configuration submenu to save the current configuration to
a profile, or use the &Wn command to save to profile n.
AT&Wn
Please note the different use of profile numbers in the AT&Vn and AT&Wn com-
mands.
There are 5 sets of pre-programmed profiles that come with each 2864 series mo-
dem. One is the factory default that is stored in the ROM and is not user alterable.
The other four are stored in the non-volatile memory and are pre-programmed to
suit the most common applications. You can modify these profiles and save them for
your specific applications. You can view each set of profile settings by typing AT&Vn
(n=0-5) from the terminal. The commands and their responses are as follows. The
value shown for each register is a decimal number.
AT&V0
Current Settings.............
B0 E1 L4
&B1 &C1 &D2 &G0 &H3 &J0 &K4 &L0 &M0 &N0 &P0 &R1 &S0
&X0 &Y1
*B0 *C0 *D0
S000=000 S001=000
S005=008 S006=003
S010=007 S011=070
S015=130 S016=000
S020=001 S021=178
S025=000 S026=000
S030=000 S031=017
S035=032 S036=000
S040=000 S041=000
S045=100 S046=028
S050=000 S051=000
S055=000 S056=000
S060=000 S061=000
Chapter 7

PROFILES

M1 N5 Q0
*E0 *F0 *G0
S002=043
S007=060
S012=000
S017=018
S022=000
S027=156
S032=019
S037=000
S042=000
S047=064
S052=000
S057=000
S062=000
V1 X5
*I0 *L0 *M0
S003=013
S008=002
S013=000
S018=000
S023=105
S028=068
S033=255
S038=000
S043=008
S048=000
S053=000
S058=000
S063=000
7–1
*P9 *Q2 *S0
S004=010
S009=006
S014=002
S019=000
S024=138
S029=000
S034=030
S039=032
S044=000
S049=006
S054=000
S059=000
S064=000