ZyXEL Communications 2864 Series User Manual page 91

ZyXEL-specific Registers
S12 Reserved.
S13 Bit-mapped register; default: 0:
Code Bits
(1)
S14 Bit-mapped register; default: 2:
Code Bits
&M0 (7,6)
&M1
&M2
&M3
&X0 (5,4)
&X1
&X2
&L0 (3,2)
&L1
&L2
&T4 (1)
&T5
*M0 (0)
*M1
S15 Bit-mapped register; default: 130:
Code Bits
Z0 (7,6,5)
Bin. Dec. Description
0 0 Doesn't capture modem manufacturer info.
(Default)
1 2 Captures modem manufacturer information
during V.42 handshake. Will be displayed in
ATI2 Last Speed/Protocol line if available.
Bin. Dec. Description
00 0 Async, buffered. (Default)
01 64 Async command, sync data.
10 128 Async direct, unbuffered.
11 192 Sync.
00 0 Internal clock. (Default)
01 16 External clock (from DTE).
10 32 Remote clock (Slave).
00 0 Dial-up line. (Default)
01 4 2W leased line.
10 8 4W leased line.
0 0 Grants remote digital loopback test request.
1 2 Denies remote digital loopback test request.
(Default)
0 0 Originate mode auto-handshake in leased-
line operation. (Default)
1 1 Answer mode auto-handshake in leased-line
operation.
Bin. Dec. Description
000 0 Profile 0 as active settings; also active after
the next power turn-on.
8–5