ZyXEL Communications 2864 Series User Manual page 102

Remote configuration control:
Code Bits
(4,3,2)
*Wab (1)
*Rab
*F1 (0)
*F0
*. Remote digital loopback request must also be granted. (AT&T4).
S37 Bit-mapped register;
Default: 0 For remote configuration using the panel menu: (See *W ab , *R ab )
Code Bits
(7 to 4)
(3 to 0)
Note: 0 through 3 are profiles 0 to 3, 4 is the current profile, and 5 is the
factory default (4 and 5 are read-only).
Note: When using the LCD panel for remote configuration, set S36b1
and S37 first, then activate it in the DIAGNOSTIC menu.
S38 Bit-mapped register, default: 0:
Code Bits
(7, 6)
(5)
(4)
Bin. Dec. Description
Reserved.
Writes from the local profile a to the remote
0 0
profile b .
1 2 Reads from the remote profile b to the local
profile a .
0 0 Denies remote request for configuration.
*
1 1 Grants remote request for configuration.
Dec. Description
0 to 5 Local profile number.
0 to 5 Remote profile number.
Bin. Dec. Description
Reserved.
1 32 Disables MNP5 negotiation regardless of
error control setting.
0 0 Multi-Auto answer with fax answering ena-
bled. (Default)
1 16 Disables fax answering in Multi-Auto mode.
Hangs up if a fax call is received.
8–16