Audio Options - ZyXEL Communications 2864 Series User Manual

Note: Only the expedited break is implemented in transmission, but all
types of break are accepted in reception.

AUDIO OPTIONS

SPEAKER CONTROL
ALWAYS OFF
+ ON UNTIL
CONNECT
ALWAYS ON
DIALED TO
CONNECT
SPEAKER VOLUME
0 - 7
RING VOLUME
0 - 7
The speaker is always OFF. The ring is inde-
ATM0
pendently controlled by RING VOLUME.
The speaker is ON until a carrier is detected.
ATM1
(Default)
The speaker is always ON.
ATM2
The speaker is ON after the final digit is dialed
ATM3
out and the speaker is OFF when a carrier is de-
tected. Tone dialing is inaudible.
Default is 4. The higher the value, the higher the
ATL0
... volume. If not ATM0, the speaker volume is set
to maximum when in call progress monitoring.
ATL7
Default is 5. The higher the value, the higher the
ATN0
... volume. A value of 0 disables the ring function.
ATN7
6–12