How To Become A Registered Owner; What You Need To Have; Communication Software - ZyXEL Communications 2864 Series User Manual

• one (1) 2864 series universal modem
• one (1) power adapter (external model)
• one (1) RJ11 telephone cable
• one (1) JM8 leased-line cable (2864L model only)
one (1) RJ45 ISDN telephone cable (2864I model only)
• one (1) 2864 series user's manual
• one (1) ZFAX 3.5" floppy disk and floppy disk(s) for drivers and other utilities.
• one (1) warranty/registration card
• one (1) Quick Reference Card
Contact your dealer or the store where you bought the modem if anything is miss-
ing. Check the modem for shipping damages. If you find any damage, contact the
shipping agency immediately.
Retain the shipping and cushioning materials for future storage or shipping needs.
Please direct any additional questions about damaged or missing materials to your
dealer or distributor, or to the factory address listed on your warranty card.

How To Become A Registered Owner

Fill in the registration card and mail it to the address found on the reverse side of the
card. Registered owners will receive future product and update information. You
don't have to register to receive warranty service. A dated invoice as proof of pur-
chase along with the warranty card are sufficient.

What You Need To Have

You must provide the following additional equipment to operate your modem:
• A Computer/Terminal with communication software.
• A RS-232 serial cable or a 25-wire DB25 parallel cable (with one male and one
female connector).
• A telephone line from your telephone company (dial-up or leased line).

Communication Software

Communication software controls the modem connected to the computer and di-
rects data to and from the modem. In most PC environments, the modem is used in
an asynchronous mode and the software controls the modem by AT commands.
1–8