ZyXEL Communications 2864 Series User Manual page 159

Command
+FDCS=vr,br,wd,ln,
df,ec,bf,st
+FDIS=vr,br,wd,ln,
df,ec,bf,st
+FDR
+FDT (=df,vr,wd
ln)
+FECM=n
Value Description
br=4 Bit rate: 12000 bit/s; V.17.
br=5 Bit rate: 14400 bit/s; V.17.
wd=0 Page width: 1728 pixels in 215mm.
wd=1 Page width: 2048 pixels in 255mm.
wd=2 Page width: 2432 pixels in 303mm.
ln=0 Page length: A4; 297mm.
ln=1 Page length: B4; 364mm.
ln=2 Page length: unlimited length.
df=0 Data compression format: 1-D; modified Huff-
man.
df=1 Data compression format: 2-D; modified Read.
ec=0 Error correction is disabled.
ec=1 Enables error correction mode.
bf=0 Disables binary file transfer.
st=0 Minimum scan time/line: 0 ms.
st=1 Minimum scan time/line: 5 ms.
st=2 Minimum scan time/line:10 ms (normal);
5 ms (fine).
st=3 Minimum scan time/line:10 ms.
st=4 Minimum scan time/line:20 ms (normal);
10ms (fine).
st=5 Minimum scan time/line:20 ms.
st=6 Minimum scan time/line:40 ms (normal);
20ms (fine).
st=7 Minimum scan time/line:40 ms.
Current session parameter; refer to the +FDCC
command.
Current session negotiation parameter; refer to
the +FDCC command.
Receives phase C data command; initiates
document reception.
Transmits phase C data command: releases
the DCE to proceed with the negotiation.
Error correction mode control:
n=0 Error correction mode is disabled.
15–5