ZyXEL Communications 2864 Series User Manual page 98

Code Bits
L7
N0 (3,2,1)
N1
N2
N3
N4
N5
N6
N7
S25 DTR detection delay;
Default: 0: Specifies in units of 10ms the minimum time that the DTR signal must
be OFF in order to be detected. If S25=0, the delay time is 4ms.
S26 RTS/CTS delay;
Default: 0: Sets the delay, in 10 millisecond units, between RTS and modem's
CTS response in synchronous mode. (See &Rn)
S27 Bit-mapped register; default: 156:
Code Bits
*Q0 (7,6)
*Q1
*Q2
*Q3
&H0 (5,4,3)
&H1
&H2
&H3
&H4
&H5
&K0 (2,1,0)
&K1
&K2
Bin. Dec. Description
111 224 High.
000 0 Ring volume control: OFF
001 2 Low.
010 4
011 6
100 8 Medium.
101 10 (Default)
110 12
111 14 High.
Bin. Dec. Description
00 0 No reaction to poor signal quality.
01 64 Initiates retrain if signal quality is poor. (See
also S41b2)
10 128 Adaptive rate (auto fall-back and fall-forward
when signal quality changes; default)
11 192 Disconnects when signal quality is poor.
000 0 Flow control is disabled.
001 8 Reserved.
010 16 Reserved.
011 24 Hardware CTS/RTS flow control. (Default)
100 32 Software XON/XOFF flow control.
101 40 Reserved.
000 0 No error correction.
001 1 MNP4 (Includes MNP3, see also S41b0).
010 2 MNP4 + MNP5. (See also S41b0, S38b5)
8–12