ZyXEL Communications 2864 Series User Manual page 251

V.25bis COMMAND SET
Syntax Command with Parameters
CRN CRN <dialstring>
CRS CRS n
PRN PRN n; <number>
3
RLN RLN
DIC DIC
CIC CIC
CFI CFI XX
INC INC
VAL VAL
INV INV
LSN LSN n; <number>
RST RST
Note: (1) Commands and parameters may be separated by spaces.
(2) Dial modifiers: See the ATD command.
(3) RLN is answered with several LSN displays.
Appendix D
2
Every LSN corresponds to a memory location.
1
Description
Call request with number provided.
Call request with number from
memory, 0
n is the memory location.
Saves <number> to address n
(0 n 49).
Requests list of all stored numbers.
Ignores incoming call.
Accepts incoming call.
Call failure indication:
ET Engaged Tone.
NS Number is not stored.
RT RING Tone.
AB Abort Call.
NT Answer Tone is not detected.
Incoming call.
Valid.
Invalid.
List of stored numbers.
(Response to RLN)
Changes to the asynchronous
AT command mode.
D–1
n 49;