Quick Start Wizard Via The Handheld Programmer - Siemens SITRANS L Series Compact Operating Instructions

6.2.5

Quick Start Wizard via the handheld programmer

Parameter menus
Note
For the complete list of parameters with instructions, and Dimension drawings, see the full
operating instructions.
1. Quick Start
● Point the programmer at the display from a maximum distance of 300 mm (1 ft), then
press RIGHT arrow
● Press RIGHT arrow
● Press RIGHT arrow
and move directly to the next item.
● To change a setting, scroll to the desired item or key in a new value.
● After modifying a value, press RIGHT arrow
to move to the next item.
● Quick Start settings take effect only after you select Yes to Apply changes from previous
steps.
1.1 Language
Selects the language to be used on the LCD and takes effect immediately.
Options
1.2 Material
Selects the appropriate echo processing algorithms for the material [see Position Detect
(2.5.7.2.) for more detail].
Options
dK < 3.0
a)
1.3 Response Rate
Sets the reaction speed of the device to measurement changes in the target range. Use a
setting just faster than the maximum filling or emptying rate (whichever is greater).
Options
SITRANS LR250 with PROFIBUS PA
Compact Operating Instructions, 11/2019, A5E48453206-AA
to activate PROGRAM mode and open menu level 1.
twice to navigate to menu item 1.1 and open parameter view.
to open Edit mode or DOWN arrow
English, Deutsch, Français, Español
* LIQUID
LIQUID LOW DK (low dielectric liquid – CLEF algorithm enabled)
a)
Response Rate (2.3.8.1.)
SLOW
MED
FAST
6.2 Programming SITRANS LR250
to accept default values
to accept it and press DOWN arrow
Fill rate (2.3.8.2.)/Empty rate per Minute
(2.3.8.3.)
0.1 m/min (0.32 ft/min)
1.0 m/min (3.28 ft/min)
10.0 m/min (32.8 ft/min)
Commissioning
45