Starting The Remote Session - AGFA Drystar 5500 Reference Manual

Starting the remote session

Starting the remote session
When starting the remote session, make sure the printer is in 'Ready' mode.
To start the remote session, enter the IP address of the printer in the Address
bar of the browser.
The Browser welcome page appears:
There are five access levels: operator, Key-operator, service engineer, specialist and
security administrator. Each level, except the operator level, has its own user name
and password.
A remote session disables the local keypad and display. While you work remotely,
the following screen is displayed:
2900H EN 20071108
D
RYSTAR
Blinking
Controlling the Drystar 5500 via a remote PC (with browser)
5500/5503 R
EFERENCE MANUAL
173