Restoring The Configuration Settings - AGFA Drystar 5500 Reference Manual

Restoring the configuration settings

When necessary, you can restore the configuration settings of the printer from
a previously made back-up copy.
The following functions are provided for restoring a back-up copy of the
configuration files:
•
'Restoring printer settings from the back-up floppy disk'
•
'Restoring printer settings from the hard disk'
Accessing the restore configuration menu
Press the Key-operator key to enter the Key-operator mode.
1
On the Key-operator main menu, press the Down key five times, followed by the
2
Confirm key to select 'Restore configuration'.
The 'Restore configuration' screen is displayed:
2 Settings 10/05/04 10:55
3 Settings 08/05/04 08:05
4 Settings 08/05/04 07:45
5 Settings 08/05/04 07:31
This menu is the starting point for restoring printer settings (see below).
Press the Escape key to return to the Key-operator main menu.
3
Press the Escape key to quit the Key-operator mode.
4
2900H EN 20071108
D 5500/5503 R
RYSTAR
(page 108).
(page 110).
Advanced operation (Key-operator mode)
EFERENCE MANUAL
107