Stopping The Printing Process - AGFA Drystar 5500 Reference Manual

Stopping the printing process

To stop the printing process on an adequate way, it is recommended to use the
Stop printing menu.
Accessing the Stop printing menu
Press the Key-operator key to enter the Key-operator mode.
1
On the Key-operator main menu, press the Confirm key to select 'Stop printing'.
2
While the current print job is finished, the Stop Printing screen is displayed:
<Modality name>>
The modality name defined during installation will be used to refer to the
corresponding modality. In case there is also a nickname (daily used name) defined
during installation, the nickname is used.
After the current print job is completed, the following screen is displayed:
Press the Confirm key to resume printing or press the Escape key to return to
3
the Key-operator main menu.
2900H EN 20071108
10:21:34 PRINTING
1 2
D 5500/5503 R
RYSTAR EFERENCE MANUAL
Blinking
Blinking
Advanced operation (Key-operator mode)
59