YASKAWA Varispeed V7 Instruction Manual page 87

Data
Byte 1,
bit 7
Bytes
2 and 3
Bytes
4 and 5
Bytes
6 and 7
* Terminal MA can be used only from DeviceNet communications. There is
no corresponding external output terminal.
86
Name
Terminal Indicates the output status of Inverter
P2 multi-function output terminal P2.
0: Terminal P2 OFF
1: Terminal P2 ON
Speed Ac- Indicates the Inverter's speed.
tual The units depend on the setting in Invert-
er constant n035. The units are not af-
fected by the speed scale (SS) setting.
Register Indicates the MEMOBUS register num-
Number ber in the executed process. These
bytes will contain the MEMOBUS error
code if a read or write error occurred.
Register Indicates the read data when executing
Data a MEMOBUS READ command.
Contents