YASKAWA Varispeed V7 Instruction Manual page 112

AC/DC Drive Object (Class 2A Hex)
The AC/DC Drive object is the object that manages information and
functions related to the Inverter operation. This object is used for opera-
tions such as setting the speed reference, monitoring various values, and
changing the settings.
The AC/DC Drive object's functions are shared with the I/O message
communications functions. When an I/O message communications con-
nection is established, the values set with this object will be overwritten
by the values set by I/O messages.
• Supported Services
Service Service Name
Code
(Hex)
0E Get_Attribute_
Single
10 Set_Attribute_
Single
• Object Contents
In- At- Name
stance tribute
00 01 Object
Soft-
ware
Revision
01 03 At Refer-
ence
6. Operating with DeviceNet Communications
Returns the contents of the specified
attribute.
Changes the contents of the speci-
fied attribute.
Contents
Indicates the AC/
DC Drive object's
software revision.
Indicates that the
Inverter's frequen-
cy detection level
was detected.
00: Stopped, accel-
erating, or deceler-
ating.
01: Frequency
matches.
Description
Setting Factory Set-
Range ting (Hex)
--- 0001
--- 00
Read Write Size
OK --- Word
OK --- Byte
111