YASKAWA Varispeed V7 Instruction Manual page 251

No. Register
No. for
Trans-
mission
169 01A9
173 01AD
174 01AE
175 01AF
176 01B0
177 01B1
178 01B2
179 01B3
Note: 1. Not initialized by constant initialization.
2. Upper limit of setting range and factory setting are doubled for 400 V
Class.
3. Depends on Inverter capacity. Refer to the next page.
4. Depends on Inverter capacity. Refer to page 152.
5. Factory setting of the model with JVOP-140 Digital Operator (with
potentiometer) is 0. Setting can be set to 1 by constant initialization.
6. The unit is determined by the value set for constant n035. For details,
refer to page 196. The unit is fixed to 0.01 Hz when inputting the fre-
quency reference using DeviceNet.
7. Depends on Inverter capacity. Refer to page 178.
8. When control mode selection (n002) is changed, factory setting corre-
sponds to the control mode. Refer to page 251.
250
Name
Output Open-phase De-
tection Time
DC Injection Braking
Proportional Gain
DC Injection Braking In-
tegral Time Constant
Reducing Carrier Fre-
quency Selection At Low
Speed
Constant Copy Function
Selection
Constant Read Selection
Prohibit
Fault History
Software Version No.
Setting Setting Unit
Range
0 to 255 s 1 s
1 to 999 1 = 0.001
1 to 250 1 = 4 ms
0, 1 1
rdy, rEd,
Cpy, vFy,
vA, Sno
0, 1 1
Stores, dis- Setting dis-
plays most abled
recent 4
alarms
Displays Setting dis-
lower- abled
place 4
digits of
software
No.
Factory User Ref.
Setting Setting Page
0 s
83 (0.083)
25 (100 ms)
0 154
rdy 186
0 187
-
-
---
---
---
52
49