YASKAWA Varispeed V7 Instruction Manual page 136

When operating with frequency larger than 60/50 Hz, change only the
Max. Output Frequency (n011).
n012
=200 V
Switching LOCAL/REMOTE Mode
The following functions can be selected by switching LOCAL or
REMOTE mode. To select the RUN/STOP command or frequency ref-
erence, change the mode in advance depending on the following appli-
cations.
• LOCAL mode: Enables the Digital Operator for RUN/STOP com-
• REMOTE mode: Enables RUN Command Selection (n003).
Constant output or
Constant torque
variable output
Base point
n013
=50 Hz
mands and FWD/REV RUN commands. The fre-
quency reference can be set using the potentiometer
or .
7. Programming Features
n011
=90 Hz
135