Drowsy Driver Detection (Ddd); If Equipped - Jeep H6 Manual

23_H6_OM_EN_IN_t.book Page 178
178 SAFETY
Anti-Lock Brake System (ABS) Warning
Light
The yellow ABS Warning Light will turn on when the
ignition is placed in the ON/RUN mode and may
stay on for as long as four seconds.
If the ABS Warning Light remains on or comes on
while driving, it indicates that the anti-lock portion
of the brake system is not functioning and that
service is required. However, the conventional
brake system will continue to operate normally if
the ABS Warning Light is on.
If the ABS Warning Light is on, the brake system
should be serviced as soon as possible to restore
the benefits of Anti-Lock Brakes. If the ABS
Warning Light does not come on when the ignition
is placed in the ON/RUN mode, have the light
repaired as soon as possible.
D D D (DDD) —
ROWSY RIVER ETECTION
I E
F QUIPPED
DDD detects when the driver is feeling fatigued
and warns the driver to pull over and take a break.
To Activate/Deactivate
DDD can be activated and deactivated through the
Uconnect system by selecting the following in
order:
1. "Safety/Driving Assistance"
2. "Drowsy Driver Detection"
WARNING!
The DDD system is an aid for driving and does
not relieve the driver of the responsibility of
driving the vehicle. If you experience fatigue
while driving, pull over safely for a break without
waiting for the DDD warnings. Only return to the
road when you are in the right physical and
mental condition to prevent endangering
yourself and other drivers.
System Warnings
The DDD system uses driver and vehicle inputs to
calculate when the driver is feeling drowsy. If the
system detects that the driver is drowsy, an
audible chime will be heard and the DDD graphic
will display on the cluster screen.
If the driver accepts the suggestion provided by the
system by pushing the OK button on the steering
wheel, the message will disappear from the
display.
If the driver does not acknowledge the warning
provided by the system, the message will remain
on the screen for one minute.
NOTE:
In the event of a DDD system failure, an amber

symbol will appear in the instrument cluster
display along with a dedicated message.
If the ABS activates, "ABS ACTIVE" will display in

place of the DDD symbol and will remain active
until the ABS deactivates.