Jeep H6 Manual page 87

23_H6_OM_EN_IN_t.book Page 87
Trip Info
Push and release the up or down
button until the Trip menu title is displayed in the
instrument cluster display. Toggle the left
right arrow button to select Trip A or Trip B. The
Trip information will display the following:
Distance – Shows the total distance (mi or km)

traveled for Trip A or Trip B since the last reset.
Average Fuel Economy – Shows the average

fuel economy (MPG or L/100 km or km/L) of
Trip A or Trip B since the last reset.
Elapsed Time – Shows the total elapsed time of

travel since Trip A or Trip B has been reset.
Hold the OK button to reset feature information.
Navigation — If Equipped
Push and release the left or right
button until the Navigation display icon/title is
highlighted in the instrument cluster display. Start
Route will display when no active route is set.
Cancel Route will display when an active route is
set.
Off Road — If Equipped
arrow Push and release the up
button until the Off Road Menu icon/title is
or highlighted. Push the left
button to scroll the submenus.
Terrain Status

Selec-Terrain Status

Air Suspension Status

Vehicle Dynamics

Wheel Articulation

Transfer Case Status

Steering Angle

Sway Bar Status

Axle Lock Status

arrow
Pitch And Roll

Vehicle Pitch

Vehicle Roll

Stop/Start – If Equipped
Push and release the up
button until the Stop/Start menu title is displayed
in the instrument cluster display.
GETTING TO KNOW YOUR INSTRUMENT PANEL
Audio
or down arrow Push and release the up
button until the Audio menu title is displayed in the
or right arrow instrument cluster display.
Stored Messages
Push and release the up
button until the Messages Menu Icon is highlighted
in the instrument cluster display. This feature
shows the number of stored warning messages.
Pushing the left
allow you to scroll through the stored messages.
Screen Setup
Push and release the up
button until the Screen Setup Menu Icon/Title is
highlighted in the instrument cluster display. Push
and release the OK button to enter the sub menus
and follow the prompts on the screen as needed.
The Screen Setup feature allows you to change
what information is displayed in the instrument
cluster as well as the location that information is
displayed.
or down arrow
87
or down arrow
or down arrow
or right arrow button will
or down arrow