Additional Information; Driver Memory Settings - If Equipped; Programming The Memory Feature; Linking And Unlinking The Key Fob To - Jeep 2022 CHEROKEE Owner's Manual

A I
DDITIONAL NFORMATION
© 2021 FCA US LLC. All rights reserved. Mopar and
Uconnect are registered trademarks and Mopar
Owner Connect is a trademark of FCA US LLC.
Android™ is a trademark of Google Inc. SiriusXM®
and all related marks and logos are trademarks of
SiriusXM® Radio Inc. Ú page 308.
For Uconnect system support, call
1-877-855-8400 (24 hours a day 7 days a week)
or visit DriveUconnect.com (US) or
DriveUconnect.ca (Canada).
DRIVER MEMORY SETTINGS — IF EQUIPPED
This feature allows the driver to save up to two
different memory profiles for easy recall through a
memory switch. Each memory profile saves
desired position settings for the following features:
Driver seat

Easy Entry/Exit seat (if equipped)

Side mirrors

A set of desired radio station presets

NOTE:
Your vehicle is equipped with two key fobs, each

can be linked to either memory position 1 or 2.
Be sure to program the radio presets prior to

programming the memory settings.
The memory settings switch is located on the
driver's door trim panel. The switch consists of
three buttons:
The set (S) button, which is used to activate the

memory save function.
The (1) and (2) buttons which are used to recall

either of two saved memory profiles.
Driver Memory Switch
P T M
ROGRAMMING HE EMORY
To create a new memory profile, perform the
following:
NOTE:
Saving a new memory profile will erase the
selected profile from memory.
1. Place the vehicle's ignition in the ON/RUN
position.
GETTING TO KNOW YOUR VEHICLE
2. Adjust all memory profile settings to desired
preferences (i.e., seat, side mirror and radio
station presets).
3. Push the set (S) button on the memory switch,
and then push the desired memory button (1
or 2) within five seconds. The instrument
cluster display will display which memory
position is being set.
NOTE:
Memory profiles can be set without the vehicle in
PARK, but the vehicle must be in PARK to recall a
memory profile.
L A U
INKING ND
T M
O EMORY
Your remote keyless entry key fob can be
programmed to recall one of two saved memory
profiles.
NOTE:
F
EATURE
Before programming your key fob you must select
the "Personal Settings Linked to Key Fob" feature
through the Uconnect system Ú page 150.
To program your key fob, perform the following:
1. Place the vehicle's ignition in the OFF
position.
2. Select the desired memory profile 1 or 2.
29
2
T K F
NLINKING HE EY OB