Exterior Lights; Multifunction Lever; Headlight Switch - Jeep H6 Manual

23_H6_OM_EN_IN_t.book Page 48
48 GETTING TO KNOW YOUR VEHICLE
The exterior mirrors will auto-fold in the following
situations after the ignition is placed in the OFF
position:
Pushing the lock button on the door panel

before the door is opened.
NOTE:
If the doors are already locked, push the lock
button again.
Opening the door, then pushing the lock button

on the door panel, followed by closing the door.
After exiting the vehicle, close the doors then

push the lock button on the key fob.
After exiting the vehicle, close the doors then

touch the lock icon on the Passive Entry door
handle.
If the exterior mirrors were folded automatically,
they will unfold when the ignition is placed in the
ON/RUN position.
NOTE:
If the mirrors were folded manually, by using the
power folding mirror switch on the driver's door
panel, they will not automatically unfold.

EXTERIOR LIGHTS

M L
ULTIFUNCTION EVER

Multifunction Lever

The multifunction lever controls the operation of
the turn signals, headlight beam selection and
passing lights. The multifunction lever is located on
the left side of the steering column.
H S
EADLIGHT WITCH
The headlight switch is located on the right side of
the instrument panel. The switch controls the
operation of the headlights, daytime running lights,
parking lights, low beam lights, automatic
headlights, front and rear fog lights (if equipped),
headlight leveling, and the dimming of the
instrument cluster.

Headlight Switch

1 — Instrument Panel Dimmer Control
2 — Headlight Leveling Control
3 — Rotate Headlight Control
4 — Rear Fog Light Switch
5 — Front Fog Light Switch
From the O (off) position, rotate the headlight
switch clockwise to the first detent for parking
lights and instrument panel lights operation.
Rotate the headlight switch to the second detent
for headlights, parking lights and instrument panel
lights operation.