Illuminated Vanity Mirrors - If Equipped; Outside Mirrors; Outside Mirrors With Turn Signal - If Equipped - Jeep H6 Manual

Table of Contents

Advertisement

23_H6_OM_EN_IN_t.book Page 46
46
GETTING TO KNOW YOUR VEHICLE
I
V
M
LLUMINATED
ANITY
IRRORS
I
E
F
QUIPPED
To access an illuminated vanity mirror, flip down
one of the visors and lift the mirror cover.
Illuminated Vanity Mirror Cover
Sun Visor "Slide-On-Rod" Feature —
If Equipped
The sun visor "Slide-On-Rod" feature allows for
additional flexibility in positioning the sun visor to
block out the sun.
1. Fold down the sun visor.
2. Unclip the visor from the center clip.
3. Pivot the sun visor toward the side window.
4. Extend the sun visor for additional sun
blockage.
NOTE:
The sun visor can also be extended while the sun
visor is against the windshield for additional sun
blockage through the front of the vehicle.
O
M
UTSIDE
IRRORS
The outside mirror(s) can be adjusted to the center
of the adjacent lane of traffic to achieve the
optimal view.
NOTE:
The passenger side convex outside mirror will give
a much wider view to the rear, and especially of the
lane next to your vehicle.
WARNING!
Vehicles and other objects seen in the
passenger side convex mirror will look smaller
and farther away than they really are. Relying too
much on your passenger side convex mirror
could cause you to collide with another vehicle
or other object. Use your inside mirror when
judging the size or distance of a vehicle seen in
the passenger side convex mirror.
O
M
W
T
UTSIDE
IRRORS
ITH
URN
— I
E
IGNAL
F
QUIPPED
Driver and passenger outside mirrors with turn
signal lighting contain LEDs, which are located in
the lower outer corner of each mirror.
The LEDs are turn signal indicators, which flash
with the corresponding turn signal lights in the
front and rear of the vehicle. Turning on the Hazard
Warning flashers will also activate these LEDs.
S

Advertisement

Table of Contents
loading

Table of Contents