Jeep H6 Manual page 90

23_H6_OM_EN_IN_t.book Page 90
90 GETTING TO KNOW YOUR INSTRUMENT PANEL
Lights — If Equipped
By selecting Lights, the following adjustments can
be made:
Ambient Lights (If Equipped): adjust the sensi-

tivity of lighting in the doors and overhead
console
Lights Off Delay: set the delay for headlight

shutoff after engine shutoff
Headlight Sensitivity: adjust the sensitivity of

headlight brightness
Greeting Lights: activate the direction indicators

when unlocking the doors
Daytime Lights (If Equipped): activate/deacti-

vate the daytime running lights
Cornering Lights (If Equipped): activate/deacti-

vate the cornering lights
Auto High Beam (If Equipped): activate/deacti-

vate the automatic high beam headlights
Doors And Locks — If Equipped
By selecting Doors and Locks, the following
adjustments can be made:
Auto Unlock Doors: automatic unlocking of the

doors when exiting the vehicle
Lights with Lock: activate the direction indica-

tors when locking the doors
Horn With Remote Lock: activate/deactivate the

horn when pressing the lock button on the key.
The options are "Off", "First Press", and
"Second Press"
Horn With Remote Start (If Equipped): activate/

deactivate the horn at the Remote Starting of
the engine with the key
Door Unlock: allow you to choose whether to

unlock all the doors or only the driver's side door
on the first push of the unlock button on the key
Auto Driver Comfort (If Equipped): activate/

deactivate automatic climate control during
vehicle starts
Key in Memory (If Equipped): activate/deacti-

vate memory linked to a key
Compass
By selecting Compass, the following settings can
be changed:
Calibration (If Equipped)
This compass is self-calibrating, which eliminates
the need to set the compass manually. When the
vehicle is new, the compass may appear erratic,
and the cluster will display dashes (- -) until the
compass is calibrated. You may also calibrate the
compass by completing one or more 360 degree
turns (in an area free from large metal or metallic
objects) until the dashes (- -) displayed in the
instrument cluster display turns off. The compass
will now function normally.
Variance (If Equipped)
Compass Variance is the difference between
Magnetic North and Geographic North. To
compensate for the differences, the variance
should be set for the zone where the vehicle is
driven, per the zone map. Once properly set, the
compass will automatically compensate for the
differences and provide the most accurate
compass heading.
NOTE:
Keep magnetic materials away from the top of the
instrument panel, such as iPod's, Mobile Phones,
Laptops, and Radar Detectors. This is where the
compass module is located, and it can cause inter-
ference with the compass sensor, and it may give
false readings.