Refueling The Vehicle - Jeep H6 Manual

23_H6_OM_EN_IN_t.book Page 147
Shifting to NEUTRAL from any gear will maintain
the selected view (Zoom or Standard) as long as
the vehicle is below 8 mph (13 km/h).
If the vehicle is in PARK, Zoom View is available
until the gear selector is placed in DRIVE or
REVERSE and speeds are at or above 8 mph
(13 km/h).
NOTE:
If the vehicle is in DRIVE, NEUTRAL, or REVERSE,

and speed is greater than or equal to 8 mph
(13 km/h), Zoom View is unavailable and the
icon will appear grey.
While in Zoom View, the guidelines will not be

visible.

REFUELING THE VEHICLE

The capless fuel system uses a flapper placed at
the filler pipe of the fuel tank; it opens and closes
automatically upon insertion/extraction of the fuel
nozzle. The capless fuel system is designed so that
it prevents the filling of an incorrect type of fuel.
1. Unlock the fuel filler door by pushing the
unlock button on the key fob or the unlock
button on the driver-side door trim panel.
2. Open the fuel filler door by pushing on the rear
edge of the fuel door.
Fuel Door
3. There is no fuel filler cap. A flapper door inside
the pipe seals the system.
4. Insert the fuel nozzle fully into the filler pipe;
the nozzle opens and holds the flapper door
while refueling.
STARTING AND OPERATING
Fuel Filler
1 — AdBlue® (UREA) Filler Cap - If Equipped
2 — Fuel Filler
5. Fill the vehicle with fuel, and when the fuel
nozzle "clicks" or shuts off, the fuel tank is full.
6. Wait 10 seconds before removing the fuel
nozzle to allow fuel to drain from nozzle.
7. Remove the fuel nozzle and close the fuel
door.
147