If Equipped; Heated Steering Wheel - If Equipped; Driver Memory Settings - If Equipped - Jeep GRAND CHEROKEE WK 2022 Owner's Manual

Use the four-way control to adjust the steering
column.
NOTE:
For vehicles equipped with Driver Memory
Settings, you can use your key fob or the memory
switch on the driver's door trim panel to return the
tilt/telescopic steering column to saved positions
Ú page 27.
WARNING!
Do not adjust the steering column while driving.
Adjusting the steering column while driving or
driving with the steering column unlocked, could
cause the driver to lose control of the vehicle.
Failure to follow this warning may result in
serious injury or death.
H S W
EATED TEERING HEEL
I E
F QUIPPED
The steering wheel contains a heating
element that helps warm your hands in
cold weather. The heated steering wheel
has only one temperature setting. Once
the heated steering wheel has been turned on, it
will stay on until the operator turns it off. The
heated steering wheel may not turn on when it is
already warm.
The heated steering wheel control button is
located within the climate or controls screen of the
touchscreen.
Press the heated steering wheel button once to

turn the heating element on.
Press the heated steering wheel button a

second time to turn the heating element off.
NOTE:
The engine must be running for the heated
steering wheel to operate.
For information on use with the Remote Start
system, see Ú page 20.
Persons who are unable to feel pain to the

skin because of advanced age, chronic illness,
diabetes, spinal cord injury, medication,
—
alcohol use, exhaustion, or other physical
conditions must exercise care when using the
steering wheel heater. It may cause burns
even at low temperatures, especially if used
for long periods.
Do not place anything on the steering wheel

that insulates against heat, such as a blanket
or steering wheel covers of any type and mate-
rial. This may cause the steering wheel heater
to overheat.
WARNING!
GETTING TO KNOW YOUR VEHICLE
DRIVER MEMORY SETTINGS — IF EQUIPPED
This feature allows the driver to save up to two
different memory profiles for easy recall through a
memory switch. Each memory profile saves
desired position settings for the following features:
Driver seat

Easy Entry/Exit seat operation (if equipped)

Side mirrors

Power tilt and telescopic steering column


(if equipped)

A set of desired radio station presets

NOTE:
Your vehicle is equipped with two key fobs, each

can be linked to either memory position 1 or 2.
Be sure to program the radio presets prior to

programming the memory settings.
The memory setting switch is located on the
driver's door trim panel. The switch consists of
three buttons:
The set (S) button, which is used to activate the

memory save function.
The (1) and (2) buttons which are used to recall

either of two saved memory profiles.
27
2