Table of Contents
Advertisement
23_H6_OM_EN_IN_t.book Page 135
To Deactivate The Active Speed Limiter
If you press the setting button while the Active
Speed Limiter is at standby, the Active Speed
Limiter will be deactivated. The indicator light in
the instrument panel will turn off and the
memorized speed will be erased.
NOTE:
The Cruise Control (if equipped) system will be
unavailable while the Active Speed Limiter is in
use. If the Cruise Control system is set, the Active
Speed Limiter will be canceled.
E
T
S
S
XCEEDING
HE
ET
PEED
By fully pressing the accelerator pedal, the
programmed maximum speed can be exceeded
while the device is active.
In the event that the Active Speed Limiter set value
is exceeded manually with a driver acceleration,
the indicator light will flash, and a message will
appear in the instrument cluster display.
The feature will remain disabled until the vehicle
speed drops below the set Active Speed Limiter
value, when it will reactivate automatically.
D
EACTIVATION
To turn off Active Speed Limiter, push the Active
Speed Limiter button on the right side of the
steering wheel. A message will appear in the
instrument cluster display to confirm that the
feature has been turned off. You can also
deactivate Active Speed Limiter by pressing the
CANC button. In this case, the system is not
completely turned off, and the driver can
reactivate the Active Speed Limiter by pressing the
RES button.
CRUISE CONTROL SYSTEMS — IF EQUIPPED
C
C
RUISE
ONTROL
When engaged, the Cruise Control takes over
accelerator operations at speeds greater than
20 mph (30 km/h).
The Cruise Control buttons are located on the right
side of the steering wheel.
STARTING AND OPERATING
Cruise Control Buttons
1 — SET (+)/Accel
2 — CANC/Cancel
3 — SET (-)/Decel
4 — On/Off
5 — RES/Resume
135
Advertisement
Table of Contents
