Jeep H6 Manual page 39

23_H6_OM_EN_IN_t.book Page 39
Third Row Occupant Warning Label
Second Row Fold-Flat Seats
The second row seats can be folded flat to carry
cargo.
NOTE:
Prior to folding the rear seat, it may be necessary
to position the front seat to its mid-track position.
Also, be sure that the front seats are fully upright
and positioned forward. This will allow the rear seat
to fold down easily.
To place the seat in the fold-flat position, perform
the tumble procedure previously described by
pulling either the recline lever located on the
outboard side of the seat, or the EZ entry lever
located on the upper outboard side of seatback.
Once in the tumbled position, unfold the tumbled
seat until it locks into place with the seatback
folded flat.
Second Row Folded Flat
NOTE:
You may experience deformation in the seat
cushion from the seat belt buckles if the seats are
left folded for an extended period of time. This is
normal and by simply unfolding the seats to the
open position, over time the seat cushion will
return to its normal shape.
GETTING TO KNOW YOUR VEHICLE
To raise the rear seat, lift the seatback until it locks
into place.
WARNING!
Be certain that the seatback is securely

locked into position. If the seatback is not
securely locked into position the seat will not
provide the proper stability for child seats
and/or passengers. An improperly latched
seat could cause serious injury.
When the second row seats are tumbled,

occupants of the third row seat must keep
hands and feet clear of the in-floor strikers
when the second row seats are being replaced
to the original positions. Injuries can occur if
hands or feet are in the way of the second row
seat latches.
Manual Folding Third Row Seats
Both third row seats can be folded forward to
increase the cargo area. To lower either seat, pull
on the release handle located on the upper
outboard side of the seats, and push the seatback
forward toward the front of the vehicle.
39