Spare Wheel Stowage - Jeep H6 Manual

23_H6_OM_EN_IN_t.book Page 233
5. See the following for jack and tools
description.
Jack And Tools Description
1 — Jack Handle/Lug Nut Wheel Wrench
2 — Jack
3 — Emergency Fuel Funnel
4 — Screwdriver
5 — Alignment Pin
6 — Wheel Wrench Extension
7 — Tow Eye
8 — Wheel Chocks (If Equipped)
S W S
PARE HEEL TOWAGE
Your vehicle is equipped with a space saver spare
Wheel. The spare wheel does not share the same
specifications or size as the other wheels of the
vehicle, and should only be used in emergency
situations. For further information please see
Ú page 290
The spare Wheel is stowed under the rear of the
vehicle by means of a cable winch mechanism. To
remove or stow the spare, use the jack handle/lug
wrench connected to the square socket extension
to rotate the "spare tire drive" nut. The nut is
located under a plastic cover at the rear of the
cargo floor area, just inside the liftgate opening.
IN CASE OF EMERGENCY
Spare Wheel Location
CAUTION!
The winch mechanism is designed for use with
the jack wrench extension tool only. Use of air an
wrench or power tool may damage the winch.
233