Manual Activation / Deactivation; Active Speed Limiter - If Equipped - Jeep H6 Manual

23_H6_OM_EN_IN_t.book Page 133
Conditions That Will Cause The Engine To Start
Automatically While In Autostop Mode:
The transmission selector is moved out of

DRIVE (D).
To maintain cabin temperature comfort.

HVAC is set to full defrost mode.

HVAC system temperature or fan speed is

manually adjusted.
Battery voltage drops too low.

Stop/Start OFF button is pushed.

A Stop/Start system error occurs.

Vehicle is in 4WD LOW.

Conditions That Force An Application Of The
Electric Park Brake While In Autostop Mode:
The driver's door is open and brake pedal

released.
The driver's door is open and the driver's seat

belt is unbuckled.
The engine hood has been opened.

A Stop/Start system error occurs.

If the Electric Park Brake (EPB) is applied with the
engine off, the engine may require a manual
restart and the EPB may require a manual release
(press brake pedal and push the EPB switch)
Ú page 80.
M A / D
ANUAL CTIVATION EACTIVATION
To activate/deactivate the system manually, push
the button on the instrument panel.
LED off: system activated

LED on: system deactivated

Stop/Start OFF Button
STARTING AND OPERATING
ACTIVE SPEED LIMITER — IF EQUIPPED
The Active Speed Limiter button is positioned on
the right side of the steering wheel.
Active Speed Limiter Button
The Active Speed Limiter will limit the vehicle
maximum speed to the set vehicle speed.
The speed limit can be set between 20 mph
(30 km/h) to 80 mph (130 km/h).
133