Spare Tire Removal - Jeep H6 Manual

23_H6_OM_EN_IN_t.book Page 234
234 IN CASE OF EMERGENCY
S T R
PARE IRE EMOVAL
Remove the spare tire before attempting to jack up
the vehicle.
1. Lower the third row seating flat. Lift up on the
rear load floor to access the spare tire winch.
Locate and remove the winch hole access
cover in the storage compartment to expose
the winch hole.
Winch Access Cover Location
Winch Drive Nut Location
2. Fit the jack handle extension over the winch
drive nut. Use the lug wrench handle and
extension to completely lower the spare tire.
Keep turning the handle counterclockwise
until the winch stops.
CAUTION!
The winch mechanism is designed for use with
the jack wrench extension tool only. Use of air an
wrench or power tool may damage the winch.
Lowering The Spare Wheel